The Baldr IR is a rail-mounted light with a white light LED and a Class 1 eye-safe IR beam. Designed for Picatinny (MIL-STD-1913) and Glock rails, this professional lighting tool is highly durable and provenly recoil-proof. Select the white-light mode and activate with the ambidextrous tail switch, it produces a 1350-lumen or 300-lumen beam with a far-reaching spot and ample soft flood for situational awareness. Select and activate the IR mode, it emits a focused IR beam from the bottom, invisible to the naked eye but perfect for night vision goggles. Powered by two CR123A batteries, the light runs much longer than most products on the market. The nimble swing arm allows you to install and detach it with one hand instantly. The two adjustable screws are used to zero the IR beam accurately. Once set in place, it is hard to go loose or off calibration. Accurate, reliable, and invisible, the Baldr IR gives you a great advantage during stealth night operations.
Question 1: Why can't I see IR laser？
Answer 1: IR laser is infrared light, invisible to human eyes.
Question 2: What rail is Baldr IR compatible with?
Answer 2: Designed for Picatinny (MIL-STD-1913) and Glock rail, Baldr IR is highly durable and provenly recoil-proof. The GL adapter bar is installed by default for the products of Glock company. If it is installed in Picatinny rail (mil-std-1913 rail) equipment, you can complete the replacement of the adapter bar by yourself. The package contains 1913 adapter strip, screw and screw wrench for installation.
Question 3：Why the light mode selection of my flashlight is out of control?
Answer 3: The light mode selection switch is a magnetic sensitive device. When it is close to the strong magnet, the selection confusion may occur.
Question 4：Why does the flashlight turn off suddenly?
Answer 4：The Baldr IR uses CR123A with a protection board to work, and the output may suddenly shut down due to the battery protection mechanism. (overcurrent protection or undervoltage protection)
Question 5：Why does the flashlight start to flicker?
Answer 5: When the battery is nearly running out, the flashlight will start to flicker, this is normal phenomenon. Please charge your flashlight as soon as possible.
Question 6：How to replace the battery for the Baldr IR?
Answer 6: Pull up the battery compartment cover lock marked "PULL/OPEN" at the end, the battery compartment cover will pop up, take out the old battery, and insert the new battery (note that the battery direction is consistent with the polarity symbol marked in the battery compartment cover), close it battery compartment cover, and finally reset the battery compartment cover lock.
Question 7：Why does my flashlight turn dim suddenly, and there is no reaction when I switch the brightness mode?
Answer 7: When the battery power is low, the LED output is limited to 300 lumens, and a quick double tap (or multiple taps) will not change the brightness.